Industrial Springs recently completed the manufacture of four custom-engineered volute springs, designed to deliver high load capacity and controlled performance within a demanding mechanical application.

Volute springs are chosen where high loads must be supported in limited space, making accuracy in design and manufacture essential. This project highlights our capability to produce specialised spring types to exact customer requirements.

What Are Volute Springs?
Volute springs, also known as conical compression springs, are designed to handle heavy loads while offering increased stability compared to standard compression springs. Their telescoping design helps prevent buckling and allows them to perform reliably under high stress.

These characteristics make volute springs ideal for applications where strength, durability and space efficiency are critical.

Engineered for Strength and Stability
Each of the four volute springs was precision manufactured to ensure consistent load characteristics and long-term reliability. Careful control of coil geometry and material selection allowed us to deliver springs capable of performing under significant compressive forces while maintaining stability throughout their operating range.

Precision Manufacturing to Exact Specifications
From initial design through to final inspection, every volute spring was produced under strict quality controls. This ensured dimensional accuracy, repeatable performance and compliance with the application’s mechanical requirements.

Our experienced team applied proven manufacturing techniques to achieve the required performance while maintaining the high standards expected in demanding industrial environments.

Supporting Specialist Spring Requirements
At Industrial Springs, we manufacture a wide range of specialist springs, including volute springs, for applications where standard solutions are not suitable. Whether you require a small batch, prototype or ongoing supply, we offer tailored engineering support and dependable manufacturing capability.

If you have a high-load or space-critical application requiring volute springs, our team is available to discuss your requirements and provide expert guidance.

At Industrial Springs, we continue to support demanding industrial applications with precision-engineered spring solutions. A recent project involved the manufacture of 10mm diameter governor springs produced from 316 stainless steel and finished with a copper plating, designed to meet specific operational and environmental requirements.

Designed for Control and Reliability
Governor springs play a critical role in regulating speed, pressure and mechanical response within engines and control systems. For this application, precision and consistency were essential, as the spring needed to deliver reliable performance under continuous operation and fluctuating loads.

Each spring was manufactured to exact tolerances, ensuring accurate load characteristics and dependable long-term operation within the governing mechanism.

Material Selection: 316 Stainless Steel

The use of 316 stainless steel provides excellent mechanical strength and durability, making it particularly suitable for harsh and demanding environments. Key benefits include:

• Superior corrosion resistance, including resistance to chemicals and marine conditions
• High fatigue strength for repeated load cycles
• Excellent temperature stability
• Long service life with minimal maintenance

These properties make 316 stainless steel an ideal choice for governor springs used in industrial, marine and control-based applications.

Copper Plating for Enhanced Performance
The addition of copper plating offers functional advantages beyond appearance. Copper plating can improve electrical conductivity, reduce friction, and provide additional protection in specific operating environments. In governor applications, this finish can also assist with smoother interaction between moving components and enhanced resistance to wear.

Precision Manufacturing to Exact Specifications
Manufactured at a 10mm diameter, each spring was produced under controlled processes to ensure consistent performance across the batch. From material preparation through coiling, finishing and inspection, every stage was monitored to meet the required mechanical and dimensional standards.

This approach ensures reliability where precise control and safety are essential.

Custom Governor Spring Solutions
Industrial Springs manufactures custom governor springs in a wide range of materials, sizes and finishes to suit specific applications. Whether for one-off requirements, prototyping or ongoing supply, our team provides expert support from design through to delivery.

If you have a governor spring requirement or would like to discuss a custom specification, our experienced team is available to offer technical guidance and tailored solutions.

The Oil & Gas sector demands components that perform reliably in some of the harshest operating environments in the world. From offshore platforms to onshore processing facilities, every part must withstand corrosion, pressure, temperature variation and continuous mechanical stress. At Industrial Springs, we manufacture phosphor bronze springs specifically engineered to meet these demanding conditions.

Why Phosphor Bronze for Oil & Gas Applications?
Phosphor bronze is widely recognised as a premium material choice for Oil & Gas spring applications due to its unique combination of mechanical and environmental properties. It offers:

• Excellent corrosion resistance, particularly in marine and offshore environments
• High fatigue strength, ideal for components under repeated loading
• Good wear resistance and low friction, extending service life
• Non-sparking properties, critical in hazardous environments
• Stable performance across temperature variations

These characteristics make phosphor bronze an ideal material for springs used in valves, actuators, control systems, sealing mechanisms and safety-critical assemblies throughout the Oil & Gas sector.

Precision Manufacturing to Exact Specifications
At Industrial Springs, every phosphor bronze spring we manufacture is produced to exact customer specifications. Whether the requirement is for compression, tension, torsion springs or bespoke wireforms, our experienced engineering team works closely with clients to ensure optimal performance for the intended application.

We carefully control key parameters including wire diameter, coil geometry, load characteristics and tolerances, ensuring each spring delivers consistent and repeatable performance. This attention to detail is essential for Oil & Gas applications where reliability is non-negotiable.

Quality, Traceability and Compliance
Quality is central to our manufacturing process. Our phosphor bronze springs are produced under a robust quality management system, with full material traceability and inspection throughout production. From raw material selection through to final testing and dispatch, each spring is monitored to ensure it meets the required mechanical and dimensional standards.

This structured approach provides confidence that our springs will perform reliably in safety-critical and high-stress Oil & Gas environments.

Supporting Challenging and Urgent Requirements
Oil & Gas operations often require rapid response times, whether for planned maintenance or unexpected breakdowns. Thanks to our extensive material stockholding and flexible manufacturing capabilities, we are able to support urgent production requirements without compromising quality.

From small batch runs and prototypes to ongoing supply for larger projects, we provide dependable support when it matters most.

Partnering with the Oil & Gas Industry
With decades of experience supplying springs to the Oil & Gas sector, Industrial Springs is trusted by clients who value engineering expertise, quality workmanship and responsive service. Our phosphor bronze springs are designed to perform in demanding conditions, helping maintain operational efficiency, safety and reliability.

If you have an application requiring phosphor bronze springs or would like to discuss a specific Oil & Gas requirement, our team is available to provide expert technical advice and support.

At Industrial Springs, we regularly work on bespoke spring solutions tailored to high-performance applications. One recent project involved the manufacture of a custom stainless steel tension spring for a Ford Mustang GT350, designed to meet the exact performance and durability requirements of this iconic performance vehicle.

A video of the finished spring in action can be viewed via our official social media channels.

Engineering for Performance Applications
Performance vehicles such as the Mustang GT350 demand components that offer strength, reliability and precise mechanical behaviour. For this application, a stainless steel tension spring was selected to deliver consistent tensile force while offering excellent resistance to wear, corrosion and temperature variation.

Every aspect of the spring — from coil geometry and wire diameter to end configuration — was engineered to ensure dependable performance under dynamic operating conditions.

Why Stainless Steel?
Stainless steel is a popular choice for automotive tension springs due to its combination of mechanical and environmental advantages, including:

• High strength and fatigue resistance
• Excellent corrosion resistance, ideal for exposed or under-bonnet components
• Stable performance under varying temperatures
• Long service life with minimal maintenance
• These properties make stainless steel particularly suitable for custom automotive applications where both performance and durability are critical.
• Precision Manufacturing to Exact Requirements

This Mustang GT350 spring was manufactured to precise specifications, ensuring accurate extension characteristics and consistent load performance. Our experienced team worked closely with the project requirements to produce a spring that integrates seamlessly into the vehicle’s system while maintaining the quality expected in performance engineering.

From one-off custom components to repeat production runs, we apply the same attention to detail across every project.

Supporting Bespoke & Enthusiast Builds
In addition to industrial sectors, Industrial Springs regularly supports bespoke automotive builds, performance upgrades and specialist engineering projects. Whether the requirement is for a single custom spring or a short production run, our flexible manufacturing capabilities allow us to deliver reliable solutions without compromise.

Talk to Our Team Recognised for Custom Spring Solutions
If you have a custom automotive application or performance project that requires a precision-engineered spring, our team is available to provide expert advice and support — from material selection to final manufacture.

Watch the video via X Here